ANC300
piezo positioning controller for driving attocube nano drives
The ANC300 is a modular positioner control unit providing suitable drive signals to actuate attocube's open loop positioners or scanners manually or under computer control. The ANC300 is available as a modular housing that can host up to seven plug-in modules. The touch screen allows for ease of operation.
Specifications
| General Specifications | |
|---|---|
| type of instrument | 7-slot piezo positioning controller |
| number of slots | 7 slots for ANM modules |
| connector to product (pos/mic) | BNC, 50 Ohm |
| Modes of Operation | |
| open loop positioning | depending on ANM module |
| remote operation | USB 2.0, Ethernet, RS232 |
| capacitance measurement | 50..5500 nF |
| no. device per operation | control of multiple device via one PC |
| Size and Dimensions | |
| chassis | 19" rack, 3 rack units, 84 horizontal pitches (13.5 x 45 x 34.5 cm³) |
| weight | 7.5 kg |
| Controller Hardware | |
| power consumption [W] | max. 100 |
| connector | fused IEC inlet |
| connection cable (ELE - POS) | 1 per axis, length: 2m |
| Software Drivers | |
| Windows, Linux | programming via standard textbased console; programmable LUA console (see www.lua.org); LabVIEW™ |
| Output Signals | |
| maximum capacitance load | 5.5 µF |
| output noise | < 5 mVpp (20 MHz bandwidth) |
| output filter | additional switchable output filter(1.6, 16, 160, 1600 Hz) |
| Trigger Signals | |
| trigger level definition | LVTTL (3.3 V) |
| input trigger | 16 (trigger inputs freely assignable) |
| output trigger | 4 (trigger outputs freely assignable) |