AMC110
19" three axis piezo motion controller for EC* series positioners
The three axis controller AMC110 drives and controls all ambient and vacuum positioners of the EC* series. The integrated feedback loop for optical encoders enables closed loop operation at ambient and vacuum conditions.
The 19” housing allows straight forward rack integration. In addition, the controller is perfectly suited for table-top operation. The AMC110 can be controlled through Ethernet and is delivered with Windows based Software, DLL, LabViewTM drivers set and JSON command support. Multiple upgrade options are available to ensure the best possible fit for your application (/PRO, /IO, /IDS, /RC and /Rotation Compensation feature).
Specifications
Modes of Operation | |
---|---|
open loop positioning | stepping signals for ECS positioners |
closed loop positioning | closed loop control for ECS/NUM positioners |
remote operation | Ethernet Port and USB (with adapter) |
Size and Dimensions | |
chassis | 42.7 x 28 x 4.4 cm³ |
weight | approx. 4.1 kg |
Controller Hardware | |
power supply | 100/115/230V, 50 .. 60 Hz |
connector | IEC inlet |
connection cable (ELE - POS) | 1 per axis, length: 2m |
Software Drivers | |
driver options | directly through a JSON-based REST API Wrappers for Python, LabVIEW, Matlab, C-Library (Windows/Lin), C# |
Output Signals | |
output connectors | 26-Pin SubD connector |
output voltage range | stepping : 0 .. 45 V; fine positioning : 0..45 VDC |
frequency range | stepping : 0 .. 5 kHz (1 axis); stepping : 0 .. 2 kHz (3 axes simultaneously) |
output current | stepping : max > 16 A peak |
maximum capacitance load | 2 µF |
output noise | < 5 mVpp (500 kHz bandwidth) |
resolution of signal generation | 680 µV (16 bit) |
Trigger Signals | |
trigger level definition | LVDS, LVTTL |
input trigger | 1 per axis |
trigger interface | GPIO - port |
Features and Upgrades | |
/PRO feature | enhanced functionalities and control for closed loop operation |
/IO feature | realtime interfacing with external signals (through GPIO port) |
/RC remote control feature | wireless control of nanopositioners |
AMC/IDS closed loop feature | interferometric position control using attocube`s IDS3010 |
Rotation Compensation feature | Feed-forward runout compensation of a rotator by two xy-stages |
Features