ECS Lift 3030/5050

 

For lifting high loads exceeding the capabilities of the ECSz5050 attocube offers the ECS Lift upgrade kit. It consists of front and backplate for an existing ECSx positioner and three different constant force springs compensating the specified load. There are two versions available for ECSx3030 and ECSx5050 with a different set of springs each. You can easily change between any of the three springs delivered with the ECS Lift kit. ECS Lift units can be used in all working conditions as specified for the used ECS positioners. The load compensated is independent of the vacuum conditions. The resulting force can be tuned to your application by adding balance weights.

Download_Specs.png

Technical Specifications
material stainless steel, PEEK
temperature range

0 .. 150 °C

minimum pressure 5E-11 mbar; ECS Lift units can be used in all working conditions as specified for the used ECS positioners
scope of delivery mechanical support unit, spring add-on packages for all listed constant force options
  ECS Lift/3030 ECS Lift/5050
footprint base plate 46.5 x 63 mm² 68.5 x 92 mm²
height

74 mm

94.75 mm

weight (mechanical parts) 94.8 g 279.5 g
weight (spring add-on) 13 - 60 g
weight (parts to be lifted) 56.3 g 153.3 g
dynamic force specified by used ECS positioner model

constant force (independent

from environment conditions)

option 1: 5 N (± 20%)

option 2: 8.8 N (± 20%)

option 3: 14.7 N (± 20%)

option 1: 10.5 N (± 20%)

option 2: 17.9 N (± 20%)

option 3: 22 N (± 20%)
Article Art. No.
ECS Lift/3030 1011297
ECS Lift/5050 1011298